Aluminum Fence Installation in Olympia, WA
Six aluminum fence styles, a factory powder-coated finish, and a two-year workmanship warranty
from a family-owned Chehalis fence company.
Current Project Start: About 2 weeks. Next Available Estimate: Within 48 hours. Local Permit Wait Time: Olympia only requires a permit for fences over 6 feet tall — most residential aluminum fence projects fall under that height, and we confirm your specific timeline during the on-site estimate.
Engineered for PNW Soil, Wind & Moisture
Licensed, Bonded & Locally Accountable
Specification-Driven Materials & Workmanship Warranty
If you are comparing fence materials for a home in Olympia, aluminum fencing is worth considering before you commit to wood or steel. PNW Fence & Gate installs aluminum fencing throughout Thurston and Lewis counties, and it holds up to Northwest rain without the rot, warping, or rust that wood and unprotected steel eventually show.
The result is a fence that keeps its factory finish for years, needs no painting or staining, and can be built in a style that fits anything from a front yard to a pool enclosure to a rural property line.
What Makes Aluminum Fencing a Good Fit for Olympia Homes
Aluminum does not rot, rust, or attract termites, which matters in a region where fence posts sit in wet ground for months out of the year. It also does not require repainting or resealing the way wood does, so the maintenance cost over ten or fifteen years is lower even though the upfront material cost can run higher than chain link.
Every aluminum fence installation from PNW Fence & Gate uses a factory powder-coated finish rather than an on-site coating, and we generally recommend a darker finish, such as black, for properties with heavy exposure to standing moisture, since it tends to show water spotting less than lighter colors. Ask your estimator about the current color and gauge options for your project.
If you are also weighing a deck or porch upgrade, our Snap-Tight aluminum railing uses the same rust-resistant approach for stair, deck, and porch railing.
Aluminum Fence Styles We Install
Once you know aluminum is the right material, the next decision is style. We install several aluminum fence profiles depending on the look and function you need.
Flat-Top Aluminum Fencing
A clean, unobstructed top rail that works well for front yards, side yards, pool enclosures, and modern home exteriors.
Spear-Top (Pressed Spear) Aluminum
A traditional ornamental profile with a pointed picket top, often chosen for corner lots, commercial properties, and homes that want a bit more visual deterrence.
Alternating or Aluminum Picket
Varies picket height for a more custom, estate-style look at entries and decorative frontages.
2-Rail and 3-Rail Aluminum
An open rail style suited to rural properties and long boundary lines where you want to define the property without blocking the view.
Pool-Code Compliant Aluminum
Built to Washington State pool safety requirements, with picket spacing and self-closing gate hardware sized to code.
Semi-Privacy & Hybrid Options
Pairs an aluminum frame with mesh or screen infill for partial privacy or wind screening without going to a full privacy fence.
Customization options across all styles include tighter picket spacing, puppy pickets for pet containment on the lower rail, and stepped or racked panel layouts for sloped yards, which is common on Olympia lots with grade changes.
Why Aluminum Fencing Holds Up in Western Washington Weather
Western Washington gets a lot of standing moisture, and that is hard on the wrong fence material. Wood fence posts can rot at the ground line within a handful of years in wet soil, and unprotected steel can rust and stain the surrounding concrete or landscaping. If you are weighing options, our wood fence installation page covers where wood still makes sense and where it does not.
Aluminum sidesteps both problems. It will not rust, and because the finish is applied at the factory rather than brushed on, it holds its color and coverage more evenly than a fence painted after installation. For a homeowner, that generally means a fence that still looks close to new after a decade, with no repainting cycle to budget for.
Our Aluminum Fence Installation Process
See our recent fence and gate projects for examples of completed aluminum fence work.
Free On-Site Estimate
A Tallon or a crew lead walks your property line, measures the run, and reviews style, height, gate placement, and any grade changes before you commit to a project.
Utility Locate and Layout
Before any post holes go in, we schedule the utility locate through Dig Safe Washington. State law requires two business days’ notice to 811 before excavation, and we handle that request as part of preparing your site.
Permit Check
If your fence design or height requires a permit under the City of Olympia’s rules, we confirm what is needed before installation begins so there are no surprises partway through the project.
Installation
Posts are set, panels are assembled section by section, and gates are hung and adjusted so they swing and latch correctly, including self-closing hardware where pool code applies.
Final Walkthrough
We check posts for plumb, confirm gate operation, and verify the finished height matches what was quoted. Every installation includes a 2-year workmanship warranty on labor and craftsmanship.
What Does Aluminum Fence Installation Cost in Olympia?
Nationally, aluminum fencing runs roughly $22 to $72 per linear foot installed, including materials and labor, with the wide range driven by style, picket spacing, and fence height (Angi, 2026). A basic flat-top style typically falls at the lower end of that range, while pool-code and pressed-spear styles with tighter picket spacing or automatic gates tend to run higher. Gate hardware, old fence removal, and site grading, if your lot needs it, are separate line items.
Because pricing depends on your specific run length, style, and site conditions, we provide a written, itemized estimate at your free on-site visit rather than a flat quote over the phone.
Olympia Fence Height and Permit Rules
Fence height in Olympia is set by city code, not just personal preference, and it is worth checking before you settle on a design.
Under Olympia Municipal Code 18.40.060, residential fence height is capped based on where the fence sits on your lot:
- Front yard fences: Maximum 4 feet (48 inches).
- Side and rear yard fences: Maximum 6 feet (72 inches).
- Corner lot sight triangles: Maximum 2.5 feet (30 inches), to preserve visibility at intersections and driveways.
- Agricultural and garden-bed exceptions: Fences can reach 8 feet in some rear or side yard cases if the portion above 6 feet uses an open, deer-fence-style material, subject to city approval.
A building permit is required for any fence over 6 feet tall within Olympia city limits (City of Olympia Building Permits and Land Use Review). If your property sits in unincorporated Thurston County rather than inside city limits, the county’s threshold is different, since fences up to 8 feet do not require a county permit, though setback and sight-distance rules still apply either way. We confirm which jurisdiction and rule set applies to your address as part of your estimate. For more detail, see our fence permit guide for Lewis and Thurston County.
HOA rules are a separate layer on top of city code, and they vary by neighborhood. If your property is in an HOA, check your covenants for approved fence styles, heights, and colors before ordering materials.
Why Olympia Homeowners Choose Us as Their Aluminum Fence Contractor
Choosing an aluminum fence contractor in Olympia is about more than who can set posts. You want a crew that knows the local permit process, uses materials built for this climate, and stands behind the finished work. With PNW Fence & Gate, you get:
A 5.0 rating across 27 Google reviews from customers in Chehalis, Centralia, and the surrounding area.
A family-owned business based in Chehalis, with owner Tallon Ball, who has over 20 years of hands-on construction experience, involved directly in projects rather than running the company from behind a desk.
A registered Washington contractor, licensed and insured, with license #PNWFEFG779O7 on file, $1,000,000 in liability coverage, and a $12,000 bond confirmed through Washington’s public contractor records.
An AFA Certified Gate Automation Designer on staff, for properties that want a powered gate as part of their fence line.
Engineered aluminum fence materials rather than big-box components, backed by a 2-year workmanship warranty.
One recent customer, Richard Q., told us after we fabricated a custom gate for his property: “They do an excellent job. It was the finishing touch on my property.” We bring that same attention to detail to every aluminum fence project.
Get Your Free Aluminum Fence Estimate
Ready to enhance your property with professional aluminum fence installation? Contact PNW Fence & Gate today for yoReady for a fence that holds its finish through Olympia winters without rotting or rusting? PNW Fence & Gate installs aluminum fencing across Western Washington, including Olympia, Tumwater, Lacey, Yelm, Tenino, Chehalis, and Centralia.
PNW Fence & Gate · 132 Pier Rd, Chehalis, WA 98532 Call or text (360) 996-4250
We can walk your property line, talk through style and height options, flag any permit questions for your address, and leave you with a written estimate.
Aluminum Fence Installation FAQ
What is the best aluminum fence style for an Olympia home?
It depends on the goal. Flat-top works well for a clean front-yard look, spear-top adds a security-oriented profile, and pool-code styles are built specifically to meet Washington’s pool safety spacing and gate requirements.
How tall can my fence be in Olympia, WA?
Front yard fences are capped at 4 feet, side and rear yard fences at 6 feet, and fences near intersection sight triangles at 2.5 feet, under Olympia Municipal Code 18.40.060. Fences over 6 feet require a city building permit.
Do I need a permit for an aluminum fence in Olympia?
Only if the fence exceeds 6 feet in height within city limits. Properties in unincorporated Thurston County follow a different threshold. We confirm which rules apply to your address during your free estimate.
How much does aluminum fence installation cost in Olympia?
Nationally, aluminum fencing runs about $22 to $72 per linear foot installed, depending on style, height, and gate hardware. We provide an exact written estimate after walking your property.
How long does aluminum fence installation take?
Most residential aluminum fence projects are installed in 1 to 3 days once materials are on-site, depending on the total footage, the number of gates, and whether new post footings are required.
Is aluminum fencing a good choice for wet Washington weather?
Yes. Aluminum will not rust or rot the way steel and wood can in consistently wet soil, and the factory powder-coated finish holds up without repainting.